Samsung washing machine error codes display on your washer’s digital panel if there is a problem with your machine’s operation. Many codes can be resolved quickly. Your owner’s manual will have a list of common Samsung error codes and their solutions. If your Samsung error code requires professional servicing, book a same-day appointment with one of our professional technicians. Some of the most common codes include: 1E – Water level sensor issue This Samsung washing machine error code indicates the water level sensor is not working. Turn your appliance off and disconnect power source. After 30 seconds, turn machine back on and restart your load. If problem persists, contact us at Fix It Right Appliance Repair. 3E (also 3E1, 3E2, 3E3, 3E4) – Defective motor If your motor is defective, you can fix the Samsung error code by turning your washing machine off for 30 seconds. Restart your load, if the motor does not run properly, contact us at Fix It Right Appliance Repair for same day repair service. 4E1/4E2 – Water temperature issue This Samsung error code indicates a problem with the water temperature. Check your water hoses to make sure they are connected to the right water supply valves. Your cold water line should be attached to the blue tap. 5E – Water drainage issue This Samsung washing machine error code means your washer is not draining water properly. Check the drainage pump filter to see if there is any dirt clogging the filter. Then inspect the drainage hoses and waste connection for any kinks, blockages or cracks. 6E – Water heater malfunction There are different reasons why this Samsung error code will display on your washing machine. If you see this code, turn off your machine and contact us at Fix It Right Appliance Repair to book a same day service call. 8E – Overcurrent error This Samsung washer error code usually happens if your load is too small or a foreign object is jamming the drum. Turn your machine off and check for any foreign objects. Turn your machine on and restart the program. Be careful not to underfill your appliance. 9E1/9E2 – Power supply error These Samsung washing machine error codes will appear when your washer is not getting enough power. Check your breakers to make sure they have not been tripped. Make sure your machine is plugged into a working outlet and there is nothing wrong with the electrical cord. If the problem continues, contact us at Fix It Right Appliance Repair for a same day service call. E4 – Water supply error This Samsung washer error code means that your washing machine is not detecting that the drum is filling with water. Check your water supply lines to make sure you have enough water pressure. Inspect the hoses for kinks, cracks or leaks. Inspect the inlet filters at the end of the water valve to make sure they are clean. At Fix It Right Appliance Repair we provide same day service at competitive rates. Contact us today for your free consultation.
